AS65 Conveyors | Installation & Maintenance Instructions
9
Side /Guide Installation
Guide brackets can not be placed over drive assembly mounting brackets.
u
Installing Fixed Side Rails
2
x
1
Insert drop in nuts into t-slot
on frame.
2
Align guide brackets with
drop in nuts.
3
Insert socket head cap screw
through guide clamp and into
drop in nuts.
4
insert two drop in nuts into
t-slot at tail end of frame.
2
x
2
x
5
Align clamping block to drop
in nuts.
6
Insert screws through clamp-
ing block and into drop in
nuts.
7
Loosen tracking block screws.
(Do not remove)
8
Slide guide rail in between
clamps and frame until in
place.
2
x
2
x
9
Tighten screws in clamping
blocks.
10
Tighten screws in guide
clamps.
11
Retighten screws in track-
ing block.
If sides have seals, speed of conveyor should be no faster than 30 feet per minute.
Side seals are designed for use with MAA Standard Urethane Belts.
