18
AS40-CD Conveyors | Installation & Maintenance Instructions
u
Tail Pulley Replacement
1
Press both tension release
buttons and lift up simultane-
ously.
2
Lift idler pulley out of slot.
3
Remove idler pulley from
conveyor.
4
Replace with new idler pulley.
5
Making sure to keep dog
point of set screw facing
down, insert idler pulley back into
slot.
6
Press tail pulley down until
it “snaps“ into the locked
position.
>
Re-tensioning and tracking of belt may be necessary. (Refer to tracking and tensioning sections of this manual.)
Recommended Spare Parts
u
Parts List
Part #
Description
1A0039B00WW
Tail Pulley Assembly
AC6-WW-LLL-MAE
White Urethane Belt (MVE for V-Guided)
1A0102C
Fixed End Bearing Housing LH
1A0103C
Fixed End Bearing Housing RH
1D0317A
Fixed End Bearing
1D0057A
Center Drive Bearing
1A0033A00WW
Underside Idler Roller 8"- 24" Full Width
1A0036A
Underside Idler 2"- 6" Wide Stub Roller
C-0117-090
Drive Timing Belt (≤ 50 Sprocket teeth)
C-0117-100
Drive Timing Belt (≥ 52 sprocket teeth)
1A0043A00WW
Center Idler Pulley Assembly
1D0048A00WW
Center Drive Pulley
>
Use the two digit width of the conveyor for “WW“.
Use the width and 3-digit length of the conveyor for “LLL“.
>
To order parts, please visit QCconveyors.com/serial or call us at +1 (513) 753-6000
.
