12
AS40-CD Conveyors | Installation & Maintenance Instructions
Belt Change
u
Removal of Existing Belt
>
Full width idlers must be removed before changing belt.
2
x
2
x
1
Simultaneously push in
both buttons on tension
release tail to disengage locking
mechanism.
(Frame end could have
sharp edges)
2
Rotate tension release tail
assembly up and towards the
drive end.
3
Loosen screws on mounts/
brackets on opposite side
of drive.
4
Remove screws from stand
brackets or mounts. (If stand
brackets are not used, proceed to
step 7)
2
x
4
x
2
x
5
Loosen screws on stand. (
Do
not remove
)
6
Slide stand bracket down for
clearance.
7
Remove four screws holding
guard from frame on drive
pulley side.
8
Remove two screws holding
guard on opposite side above
motor.
9
Remove guard.
10
Loosen both adjustment
screws on drive pulley
side to allow clearance for idler
pulley removal.
11
Slide idler pulley out of
slot and set aside.
12
Loosen both adjustment
screws on motor side
to allow clearance for idler pulley
removal.
