10
AS40-CD Conveyors | Installation & Maintenance Instructions
u
Installing Adjustable Guide Brackets
2
x
1
Insert economy nuts into
t-slot of guiderail and slide
into position
2
Loosely thread adjusting rod
into nuts.
3
Place a cross block onto
each guiderail and set aside.
4
Insert drop in nuts into t-slot
on frame.
2
x
2
x
5
Align guide bracket, keeping
the larger hole up, with drop
in nuts and insert screws.
6
Tighten socket head cap
screws.
7
Insert a rod vertically through
the larger hole on top of
guide bracket.
8
Secure rod from below with
socket head cap screw.
9
Tighten cap screw.
10
Slide guiderail assembly
over vertical rods on
frame.
11
Adjust guides to desired
width and tighten rods.
12
Tighten screw on cross
block to secure rod.
13
Install guiderail and block
assembly over vertical
rods and adjust to desired height.
(Guide should NOT touch belt)
