© 2020 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com
Specification subject to change.
Rev-03-08-21
INSTALLATION
FLEX Light - FLEX Mini
NOTES:
• Field modifications must comply with Q-Tran’s installation methods otherwise warranty is null and void
PCB
Insertion Placement
PVC Tape
Insert the inducer to the backside of PCB around 0.39”-0.47”,
move the inducer up and down 3-5 times gently to create a
small cavity.
Insert the inducer into the backside of PCB
It
will damage the light if inserted into front
side of PCB
Insert the feed connector pins into the
cavity that you created with the
inducer (backside of PCB)
The following operations are prohibited:
Insert into the front side of the PCB
Insert
crosswise
into the PCB
Insert
crosswise
into the PCB
NEVER insert into the front side
(LED side) of the PCB
Clasp Front Connector
1. Inducing a Cavity for Feed Connector
2. Insert the Feed Connector
