© 2020 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com
Specification subject to change.
Rev-03-08-21
INSTALLATION
FLEX Light - FLEX Mini
NOTES:
• Field modifications must comply with Q-Tran’s installation methods otherwise warranty is null and void
Extrusions - Requirements and Cautions for Installation
For fixtures with Clasp Connectors (Snap Connector also refer to the following cautions)
0.39”-0.79”
0.39”-0.79”
0.39”-0.79”
0.39”-0.79”
PULL
PULL
< 0.39”
Ensure the supply cord is not subject to mechanical stress.
Keep 0.39”-0.79” distance between the end of aluminum profile and that of aluminum mounting piece.
Mechanical stress on front connector cable shall be avoided.
It is forbidden to curl or pull the front connector cable
with excessive force.
The space between aluminum profile and aluminum mounting
piece less than 0.39” is forbidden.
It is forbidden to let any connector aluminum mounting piece
on the aluminum profile and make light deformation.
Install light in one direction. Don't let it choke in middle.