34
Changing from Passive to Bi-Amp Mode
To change from Passive to Bi-amp or Bi-amp to Passive mode in PL-LA loudspeakers:
1. Remove the six screws holding the input cup in place.
2. Remove the input cup, being careful not to place excess stress on the connecting
wiring harness.
3. Remove the wiring harness plug from the receptacle at the bottom of the cup.
4. Insert the wiring harness plug into the desired mode receptacle at the bottom of
the cup.
5. Turn the input cup over and verify that yellow is visible in the proper SETTING
port. If not, move the plug into the desired receptacle.
6. Carefully place the input cup back into position on the enclosure, being careful
not to bind or pinch any of the wiring.
7. Secure the input cup with the six screws removed in step 1.
8. Use the corresponding voicing in the amplifier
HPF
N/C
1+
1 -
2 -
2+
HF
LPF
LF
NL4 /
Barrier Strip
NL4 /
Barrier Strip
1+
1 -
2 -
2+
HF
LF
Passive Mode
Bi-Amp Mode
Passive
Bi-Amp
Summary of Contents for PL-LA Series
Page 36: ...36...