User’s manual of remote client software
Fig 2.5.43 Alarm linkage pop up image
Select electronic map alarm linkage, when receive alarm message, the corresponding hot spot
to certain channel will flash, user can click the flashing hot spot, and it will stop and the system
will consider it as being dealt with.
Select alarm log linkage, when receive alarm message, the alarm message list on the main
interface will show corresponding alarm information, double click any alarm message, the detail
information of that alarm will be showed as message.
Right click any alarm message, it will show a dialog enable you to clear the alarm
information list, otherwise, when the amount of alarm message reaches 5000, the system will
automatically clear all the alarm message.
Select alarm indicator light flashing, some alarm light will flash red in the main interface,
showed as Fig 2.5.44, click to check the alarm message then the system will withdraw the alarm
flashes. The first light indicates “signal alarm”, the second light indicates “motion detection
alarm”, the third “signal missing alarm or shelter alarm”, the fourth light indicates “all the other
alarm”
Fig 2.5.44 Alarm linkage indicator light
Notice: After devices are equipped, only after you choose alarm linkage type will the above
indicator light shows alarm.
- 54 -
