User’s manual of remote client software
Right click the dark colored part of the interface, it will show a interface enables you to enter
the higher layer map relating to the present map or enter into Electronic Map setup (NOTE: there
is no entrance to this setup interface in multicast mode). Right click “root” in the electronic map
setup interface.
Fig 2.8.2
Then popes up a dialog to add map, showed as Fig 2.8.3
Fig 2.8.3 Interface to Change Map
Click and confirm “Successfully add root map” after selecting map. Right click the map as
the above shows if need to change or add map, showed as Fig 2.8.4:
Fig 2.8.4 Interface to Change Map
If your selection is not the root map, then you can choose to add brother maps or delete
present maps. The process to add brother maps is the same as when we add root map.
2.8.5 Interface to Change Map
- 68 -