User’s manual of remote client software
2.Use DNS , show as Fig 2.5.7
If the DNS server IP is setup in the server and the IPSERVER is run in the DNS server. After
that you can connect through the DNS server. The client software will find the dynamic IP of
server through the server name or the server serial.
Input server name and DNS address (it does not needed to input IP), select “private domain”
register mode. Show as Fig 2.5.7.
While the server use the DNS function, if the server dynamic IP is changed, the client
software will find the new IP by itself when you operate the next step.
3.Use normal domain server, show as Fig 2.5.8.
In this way the server IP is not needed, just input the domain, the client software will connect
the corresponding server.
Fig 2.5.7
Fig 2.5.8
After configuration click “OK”. You can find the added server in Fig 2.5.9.
- 25 -
