User’s manual of remote client software
and 16 at present. If decrease the output screen, the channel that setup in the area below will be
clear it itself.
Fig 2.5.52
Notice: the button in this interface and preview interface are independent.
In the not preview but TV wall mode, click “play” button to output the image to the TV
wall, but don’t display image in the software interface. If you want to look the image in the
preview interface, just click “preview” to return, click “play”, and it will display the channel you
setup in the device configuration. If you want to output audio when it is decoding, right click in
the window and select audio output.
In the mode of preview and TV wall, you can’t play image in the hardware configuration
interface, if you want to preview, you should return and click “play”, now, the image play in the
preview interface is the image that output in the TV wall.
If you select “cycle play” in the local configure, both the preview interface and TV wall will
cycle play after you click “play”.
In the mode of preview and TV wall, only one screen display before your preview, click
“play” and the selected channel will be the first image. At that time, double click any image, the
image can be enlarged, and it will return after you double click again. In the status of not be
enlarged select one channel and click the channel, the channel played before will be changed into
the selected channel. If select one channel, right click and you can start the related audio.
Otherwise, this client software don’t support to output the decode card audio from the PC audio
out port.
Notice: the audio of each channel only can be output from two defined decode cards, the
audio can’t be output in the cycle play time.
- 60 -
