Q-See
SuperDVR & 8PCRP/8PCDP/16PCRP
User Manual
84
The priority order of the recording modes is: Sensor Alarm Record > Motion
Detection Record > Manual Record > Schedule Record
Appendix 2.2.3 How to set recycling record mode on the system
Select ‘
Recycle
’ in basic configuration, refer to Figure4-1.
Users can select the percent of used disk space to set up “disk shortage
alarm.” You can input percent manually or choose the selectable options such
as, 25%, 50%, and 75% to set up. For example, if selecting 50%, an alarm will
warn you when your disk space usage reaches 50%.
TIP
It is recommended that you install SuperDVR onto the partition with your Windows
system (normally C:), and save recorded files on a different partition: .
Appendix 2.2.4 How to set auto reboot function
When a Microsoft Windows system runs continuously for a couple of days the
system may become unstable; therefore, it is suggested you restart the
computer every few of days.
In the basic configuration (refer to Figure4-1), input Windows user name and
password (It is not SuperDVR user name and password), and select time
interval, then the Windows system will automatically restart according to the
set time.
If the Windows system shutdown unexpectedly, i.e. power supply is cut off,
when computer reboots, SuperDVR system will automatically restart, and
keep the settings you have entered.
TIP
Users do not need to enable auto reboot function, but it’s suggested to input the
Windows user name and password in the relative area, therefore when the system shuts
down unexpectedly, users don’t need to input Windows and SuperDVR user names and
passwords.
Appendix 2.2.5 How to quickly setup the schedule record function
Press ‘
Shift
’ or ‘
Ctrl
’ key, and draw the cursor in corresponding areas to make
schedules for multiple channels.
Appendix 2.2.6 What are the byte rates for different image qualities from
highest to normal?
The frame rate is 30 fps, bit rate for the highest image quality is about
1.2MByte/s, and for the lowest image quality is about 50KByte/s.
Appendix 2.2.7 The frame rate seems to be lower than what I set
There is frame loss in image switch therefore the real recording frame rate is
relatively lower than the theoretic value.
