Q-See
SuperDVR & 8PCRP/8PCDP/16PCRP
User Manual
42
•
: Next Frame. This button is valid when playing back by single
channel playing back in pause mode
Users can select suitable playing speed in the area as shown below:
Figure6-4 Playing Speed Controller
The following area shows the recorded files of different channels:
Figure6-5 Recorded Files Browser
The upper bar shows the hours in a whole day. Click the bar, and it will be
magnified 10 times, therefore users can see the detailed time marks. When
searching for a certain section of the file, users can draw the scrolling-bar to
the area that most likely contains the needed section. If necessary, click the
bar once and see the magnified time marks for precise search.
The left side shows the available channels. When a certain channel has been
selected for playing back, the background color will be highlighted, or it’s dark
gray, and a tick sign will appear beside the channel title.
The main area at the center gives details of the recorded files. Different colors
of the bar show the different types of record modes of the files. The following
are the definitions of the color bars:
•
Blue: Manual Record Events
•
Green: Schedule Record Events
•
Yellow: Motion Detection Record Events
•
Red: Sensor Alarm Record Events
Click
to play selected recorded files. The system offers playback in
1 Ch, 4CH, 9 CH, and 16CH. The following is the multiple channel playback
options in the control area:
Figure6-6 Multiple Channel Playback Control
The system default playiback mode is one channel. That is Camera1. If users
need to change to other channels, then click
and the channel
configuration window will appear, as shown below:
