Q-See
SuperDVR & 8PCRP/8PCDP/16PCRP
User Manual
26
4.5 Motion Detection Alarm Configuration
4.5.1 Alarm Triggering Conditions Configuration
The system can receive alarms from both local place and network.
Local Alarm Record Triggering Configuration
Figure4-9 Local Alarm Triggering Configuration
Explanation of options:
1.
Buzzer
Users can select whether to trigger the computer buzzer if alarms have been
triggered and also select how long the buzzer sounds.
2.
Pre-Alarm Record
Users can select whether to enable alarm pre-record and also pre-record
time.
3.
Big Screen Holding Time
The corresponding channel will be full screen when an alarm is triggered. Set
the full screen hold time here.
4.
Motion Holding Time
How long the recording continues after motion stops.
5.
Sensor Holding Time
How long the recording continues after sensor stops.
6.
Disk Shortage Alarm
If the Partition free space is less than the set percent, it will stop recording or
recycling, but give alarm tips according to the settings.
