WEB OPERATION
QC40198/QC40196 User Manual
105 |
P a g e
Please refer to the following chart for detailed information.
Parameter Function
Channel
You can select monitor channel from the dropdown list. .
Protocol
Select the corresponding dome protocol.(such as PELCOD)
Address
Set corresponding dome address. Default value is 1. Your setup here
must comply with your dome address; otherwise you can not control
the speed dome.
Baud
Rate
Select the dome baud rate. Default setup is 9600.
Data Bit
Default setup is 8. Set according to the speed dome dial switch setup.
Stop bit
Default setup is 1. Set according to the speed dome dial switch setup.
Parity
Default setup is none. Set according to the speed dome dial switch
setup.
Save
You can click save button after you complete setup for one channel,
or you can complete the whole setup and then click save button.
Refresh
Click this button to get device’s latest configuration information.
Default & Backup
Default: Restore factory default setup. You can select corresponding items.
Backup: Export current configuration to local PC or import configuration from current PC.
Please refer to
X471H 471H471H
Figure 7-49.
Please note system can not restore some information such as network IP address.
Figure 7-54
