NAVIGATION AND CONTROLS
QC40198/QC40196 User Manual
35 |
P a g e
4.5.3 Video Loss
As illustrated in Figure 4-25, select video loss from the Event Type list. This function informs you when video
loss has occurred. You can enable alarm output channel and then enable show message function.
Tips:
You can enable preset/tour/pattern activation operation when video loss occurs. Refer to chapter 4.5.2 motion
detection for detailed information.
Figure 4-25
4.5.4 Camera Masking
When someone viciously masks lens, the system can alert you to guarantee video continuity. Camera masking
interface is shown in Figure 4-26
X31
Note:
In Detect interface, copy/paste function is only valid for the same type, which means you cannot copy a channel
setup in video loss mode to camera masking mode.
