W W W . Q - C O N N E C T . C O M
3
AUTOFEED SHREDDING OPERATION
AUTOFEED SHREDDING CAPACITY:
Shreds:
• Maximum 120 sheets of A4.
• Up to 10 sheets stapled paper stacks.
• Up to 10 sheets clipped paper stacks.
POWER ON SHREDDER
1. Plug into ground standard household power outlet (220-V).
2. Put main power switch in ON (-) position.
3. Turn power on.
OPEN LID AND LOAD PAPER
• Paper should be flat and aligned with paper tray.
CLOSE LID
• The shredder automatically starts when you close the lid.
MANUAL FEED SHREDDING OPERATION
POWER ON SHREDDER
1. Plug into ground standard household power outlet (220-V).
2. Put main power switch in ON (-) position.
3. Turn power on.
4. Make sure you do not exceed sheet count per pass (10 sheets
max.). Insert paper as straight as possible into feed slot and re-
lease.
5. Insert one credit card at a time into the middle of the feed slot.
NOTE
• Always turn off and unplug the shredder when not in use.
• This shredder will shred staples and small paperclips. It is rec-
ommended that you remove paperclips whenever possible to
extend the lifespan of your shredder.
• Only shred credit cards by feeding them vertically into the mid-
dle of the entry, releasing when shredding begins. Never feed
more than one credit card at a time.
• Overfeeding the shredder: shredding beyond the specified
sheet capacity can result in extensive damage to the shredder.
Overfeeding will strain the machine and quickly wear and break
the cutting blades and internal components.
• Overheating with extended use: in the event that the shredder
has shred continuously beyond the maximum running time
and overheating, the unit will automatically shut off. If this hap-
pens, switch the shredder off for 45 minutes or longer before
resuming normal operation.
t
AUTOFEED TRAY
MANUAL FEED
SLOT
SHEET CAPACITY
120 sheets of A4
10 sheets of A4
PAPER SHRED
SIZE
4.0 mm x 12.0 mm
PAPER TRAY SIZE
A4
N/a
PAPER ENTRY
WIDTH
220 mm
CREDIT CARD
CAPACITY
n/a
One per pass
DUTY CYCLE
60 min. on / 45
min. off
20 min. on / 45
min. off
VOLTAGE
220 V~50 hz / 1.5 A
push
down
CORRECT FIT
CORRECT FIT
Figure 1
push
down
ON
OFF
–
O
Figure 2
