Q CELLS Q.PRO L-G4.1, Installation And Operation Manual

Page: 7 / 11

12 13 INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.PRO L-G4.1, Q.PRO L-G4.2, Q.PLUS L-G4.1, Q.PLUS L-G4.2 – EN
INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.PRO L-G4.1, Q.PRO L-G4.2, Q.PLUS L-G4.1, Q.PLUS L-G4.2 – EN
13 12
DANGER
! Risk of fatal injury due to electric
shock!
Ä Block off the installation zone.
Ä Keep children and unauthorized
individuals away from the solar power
system.
DANGER
! Risk of fatal injury due to electric
shock!
Ä Ensure that modules and tools are not
subject to moisture or rain at any time
during installation.
WARNING
! Risk of injury due to falling
modules!
Ä Secure modules during installation.
Ä Do not install modules in windy or wet
weather.
DANGER
! Risk of fatal injury due to electric
shock!
Ä Only use dry, insulated tools.
Ä
Do not carry out the installation alone.
• Only install undamaged modules and
components.
Ä Do not modify the module (e.g. do not
drill any additional holes).
3.2 Preparation of installation
3 INSTALLATION
Ä
Maintain an interval of at least 10 mm
between two modules along the short
side and 5 mm along the long side.
10 mm
5 mm
EU
Option 2:
Ä
Install the module at the 4 mounting
points, see p. 7.
Ä Tighten clamps according to
manufacturer’s instructions.
NOTE
! Module damage may occur!
Ä Do not subject modules to mechanical
tension. Max. torsion 10 mm/m.
Option 3:
Ä
Install the module using mounting
profiles, see p. 7.
Option 1:
Ä
Fasten the module with 4 clamps
in the specified clamping range,
see p. 7.
Ä Tighten clamps according to
manufacturer’s instructions.
3.3 Module installation 3 INSTALLATION