Q-Bot R1EX User Manual Download Page 58

Page: 58 / 66

58 / 66

Be observant of your surroundings. Slow down when you are near other people, especially children, and let them

pass first.

Keep a safe distance from other SCV riders. Ride inline rather than side by side.

Control your riding speed and make sure that you are able to stop at any time.

Remain relaxed, with slightly bent elbows and knees, and look straight forward while riding.

Do not ride the Q-BOT backward unless you are trying to avoid obstacles in front of you.

Do not strongly pull the Handlebar forward and backward, or change your

body position drastically. This can cause injury or damage.

Always leave a small gap between yourself and the Handlebar. Do not lean

against the Handlebar or the Turning Shaft as this may cause you to fall.

Please step off of the Q-BOT and charge the Battery Pack when the Q-BOT

has a low battery.

Do not park the Q-BOT in places where traffic will be blocked.

Do not rest anything on the Footboard Mat while riding the Q-BOT.

Stay where you are and call for the police if you are in a traffic accident.

If you need to carry something on your ride, use the Q-BOT Front Bag as a backpack. If attached to the Handlebar,

the total load cannot be over 5 Kg (11 lbs).

Make sure the Q-BOT is powered off before transporting it. Use auxiliary parts to transport your Q-BOT if

necessary. Do not lift the Q-BOT from the sides of the Tires to avoid fingers being stuck between the case and the

Tires.

Clean and perform routine maintenance on your Q-BOT regularly.

Operating and Maintaining Your Q-BOT

Summary of Contents for R1EX



































































Search results

Summary of Contents for R1EX

Reviews:

Related manuals for R1EX

Brands by name

Popular brands

Q-Bot R1EX, User Manual

Search results

Summary of Contents for R1EX

Reviews:

Related manuals for R1EX

Brands by name

Popular brands