26 / 66
Important Working Modes:
Working Mode
Description
Standby Mode
The Q-BOT is in Standby Mode by default. Most of the other modes will be started from Standby
Mode.
Balance Mode
Indicates the Q-BOT has detected a rider and the footboard angle is moderate. Training Mode and
Speed Mode can be activated from Balance Mode. Read Section 3 for more information.
Automatic Balance
When a rider steps onto the Q-BOT and the footboard angle is moderate (between 2
°
and 15
°
), the
system will start to level the footboard. In the meantime, the Q-BOT may travel a short distance either
backward or forward in order to balance itself. An excessive or too small angle will trigger an error
warning.
Excessive Angle
When a rider steps onto the Q-BOT and the footboard angle is too big, the Q-BOT will vibrate to warn
the rider to slowly level the footboard.
Self-examination Mode
The Q-BOT will examine and calibrate itself in Self-examination Mode. Read Section 3.6 for more
information.
Error
If the Q-BOT detects an error or a system fault during normal riding conditions it will automatically
reduce the speed and slowly stop. The Tires will be locked if it needs extra assistance to solve the
problem. Once the Tires are locked, please contact your local distributor for maintenance service.
Assist Mode
Under Assist Mode, the Q-BOT will provide a small amount of power to allow the SCV to be easily
dragged. You can choose different reference points when entering Assist Mode. For more information
about Assist Mode, please refer to Section 3.4 Assist Mode.
Remote Control Mode
Remote Control Mode can be started from your Smartphone App. The Q-BOT can receive and execute
