5 – Configuration, SETUP menu
Below you find all the SETUP menu entries and their descriptions
Language
It is possible to select the language of the device:
- EN: English (default)
- IT: Italiano
- DE: Deutsch
- FR: Francais
Recording
Recording mode can be set according to three configurations:
ALWAYS: recording always activated, every time the chronometer starts to count; a new file will be created and a new session will be recorded (default)
MANUAL: recording is manual, every time you go back to the main screen, you will be asked to save the new session
Time zone
Time zone setting, set the time difference from Greenwich Mean Time (GMT).
Speed unit
Set the speed unit: Km/h (metric, default), mph (imperial)
Temperature
Set the temperature (this setting is of no use if the device is not attached to a Box Expander): °C (Degrees Celsius, default), °F (Fahrenheit)
Pulse RPM
Set the RPM reading parameters (this setting is of no use if the device is not attached to a Box Expander):
1 - one pulse per drive shaft rotation (ex. standard 2 stroke engines)
2 - two pulses per drive shaft rotation (ex. 2 stroke engines with waste spark)
½ – one pulse per two drive shaft rotations (ex.: standard 4 stroke engines)
Backlight
Back light setting: ON (active, default), OFF (deactivated)
Freeze time
Sets the seconds per visualisation of the time per lap upon reaching the finish line 10 – 60 seconds (30 second default)
Led
Configure the use of the led:
BEST: the led switches on at the finish line when retrieving the best lap of the session (default)
RPM: maximum RPM exceeded, the led flashes when an RPM threshold is exceeded
TEMP: temperature alarm function, the led flashes when a set temperature threshold is exceeded.
PZRacing Via de Gasperi 5 – 61032 Fano (PU) Italy - Tel: +39 0721 820434 – Email: [email protected]
