4.2
ST-590SS Piping
The ST-590SS sensor has 3/4” female NPT threaded ports on the sensor itself and therefore does not require
a custom tee assembly. It is recommended that two 3/4” NPT to 1/4” tubing adapters are used to connect
the sensor to the sampling system. Sample water entering the sensor must be cooled down to below 104
°F (40 °C). The sensor can be held by a 1.75-inch pipe clamp or mounted to a panel with four 1/4-28 bolts.
See Figure 4 for ST-590SS dimensions.
Figure 3.
Dimension of the ST-590SS (inch)
ST-590 User Manual
| +1 (866) 203-8397
6
Summary of Contents for 50690
Page 1: ......
