4
Installation
4.1
ST-590 Piping
The provided ST-001 Tee Assembly can be connected to a pipe system through the 3/4” female ports, either
socket or NPT threaded. To properly install the ST-590 sensor into the ST-001 Tee Assembly, follow the steps
below:
1. Insert the provided O-ring into the O-ring groove on the tee.
2. Insert the ST-590 sensor into the tee.
3. Tighten the tee nut onto the tee to form a water-tight, compression seal.
Figure 2.
Dimension of the ST-590 and the ST-001 Tee Assembly (mm)
ST-590 User Manual
| +1 (866) 203-8397
5
Summary of Contents for 50690
Page 1: ......