6
INTRODUCTION
SMOKE DETECTOR
The SMOKE-WE is designed to sense smoke that comes into the sensing chamber and to
give early warning of developing fires by alarming from its built-in piezo.
It does not sense gas, or flame.
HEAT DETECTOR
The HEAT-WE senses ambient temperature via a thermistor and provides an early warning
of developing fires by alarming from its built-in piezo when the temperature rises above a
predefined value.
It does not sense gas, or smoke.
Please note: These detectors can only provide pre-warning if they are located, installed, and
maintained properly as described in this guide.
SPECIFICATIONS
DIMENSIONS & WEIGHT
SMOKE-WE
HEAT-WE
Dimensions (Ø x D)
120 x 52.45mm
120 x 52.45mm
Weight (including battery)
183g
172g
PERFORMANCE
SMOKE-WE
HEAT-WE
Detection
Smoke only
Heat only
Sensor low voltage alert
2.6 - 2.7VDC
2.6 - 2.7VDC
RF low voltage alert
2.5V +/- 5% @ 25C
2.5V +/- 5% @ 25C
