17
ALARM - HEAT
VISUAL AND AUDIBLE PATTERN
Red LED flashing once after three beeps, followed
by a 1.5 second pause.
MEANING
The device has detected the temperature of the environment is above
57
°
C
.
TO SILENCE THE ALARM
When the device is in an alarm condition, pressing the test button will silence the device
for approximately 8 minutes. At the end of this timer, if the temperature of the environment
is above
57
°
C
, the device will re-alarm immediately.
CLEAN ME - SMOKE
VISUAL AND AUDIBLE PATTERN
Yellow LED flashing twice with beeps on each
flash. The will be followed by a 48 second interval.
MEANING
The device has detected that the smoke chamber entrance is not clear and needs to be
cleaned out. Please refer to ‘Taking Care of the Devices’ for help cleaning out the device.
LOW SENSITIVITY - SMOKE
VISUAL AND AUDIBLE PATTERN
Yellow LED flashing once on the second beep
followed by a 48 second interval.
MEANING
There is an issue with the sensor and it is indicating it will need a higher level of smoke
to trigger the device. Refer to the ‘Installation & Location Advice’ and ‘Taking Care of the
Devices’ sections for advice.
1.5s
48s
48s
