EURO 162/280 Installation Manual
Page: 31
8.3
Connecting The External Proximity Reader (EURO-PROXE)
The External Proximity Reader can be used as either an set,
unset, entry control or an access control device.
NOTE:
See the reader installation manual for the LED and
button explanations.
NOTE:
The total number of readers that can be installed on
the EURO 162 and EURO 280 is 7. The readers are installed
on the same bus as the keypads.
8.3.1
Technical Specification
EURO-PROXE (External Tag Reader)
Supply voltage:
9-15VDC
Current consumption:
Max 22mA
Input status when reader is Set/Unset or Ward Control:
Input:
Programmable. DEOL
Input EOL fixed resistor
value:
Alarm=4K7 / Tamper=2K2
Normal: 1k4 to 2k9
Burglary Alarm:4k2 to 7k8
Tamper: <1k4 or >22k
Input status when reader is used as Access or Door Entry Control:
Input 1:
Programmable
Input Function:
Door monitor feature. Door opening time limit is programmable from the
Engineer Menu
Input 2:
Not programmable
Note: Access control falls outside the scope of EN 50131
Output 1:
Not programmable. Activates the Door Lock Relay
Output 2:
Not programmable. Door monitor alarm activation (forced or open for longer
than programmed time).
Output 1/2 Normal state:
Floating
Output 1/2 Active state:
0V
Colour and Casing:
3mm ABS Black
Potted
Type B
Temperatures:
Storage: -10°C to 50°C
Certified: -25°C to 60°C
Nominal: -10°C to 50°C
Dimensions (H x W x D):
85 x 85 x 21mm
IP65 Rated. If the control panel fails to set, this is indicated by a broken tone on the external
proximity reader and the red LED will not illuminate. If this occurs, please check the
information at the nearest keypad.
8.3.2
Addressing the External Tag Reader (From the Reader)
ADDRESS #1:
BROWN & ORANGE to 0V/D1
ADDRESS #2:
BROWN & GREEN to 0V/D1
ADDRESS #3:
BROWN to 0V/D1
ADDRESS #4:
GREEN & ORANGE to 0V/D1
ADDRESS #5
: ORANGE to 0V/D1
ADDRESS #6:
GREEN to 0V/D1
ADDRESS #7:
BROWN, ORANGE & GREEN to 0V/D1
