EURO 162/280 Installation Manual
Page: 11
2.
Installation
1.
Unscrew and remove the cover of the EURO control panel (Figure 1).
2.
Install the supplied stand offs if needed before you mount the metal case to the wall (Figure 3).
Figure 1. Figure 2. Figure 3.
3.
If required, connect any other devices (input expanders, output expanders etc.) before powering
up the system.
4.
The modem is already connected and will need the telephone line connecting. See page 54.
5.
Screw the back metal plate to the wall.
6.
The tamper mechanism
comes already fitted and will
operate properly once the
casing is fitted to the wall. If
using the stand offs, the
following will need to be used
for the rear tamper
mechanism to work correctly.
7.
Secure all the wires and close the enclosure making sure the tamper is operational
8.
Turn on the power to the EURO control panel.
