Pyronix ATLAS 8, Installation Instructions Manual

Page: 22 / 36

Page 22
11.11.3 System Option 1
Enter followed by - . The RKP display will toggle
✔
and X as the numbered keys are pressed,
indicating the selection made.
Key Press
Display
1 2 3 4
Double Pole Zone User Log Reset
Enabled
Pulse Dial External and Internal
Sounders on Tamper
Activation
X End Of Line Zones User Log reset
Disabled
Tone Dial Internal Sounder
Only On Tamper
Press to accept.
11.11.4 System Option 2
Enter followed by - . The RKP display will toggle
✔
and X as the numbered keys are pressed,
indicating the selection made.
Key Press
Display
1 2 3 4
7 Day test dial Dial in Wide handshake filters Silent PA zones
X
24 Hour test dial No dial in Standard handshake filters Audible PA zones
Press to accept.
11.11.5 System Option 3
Enter followed by - . The RKP display will toggle
✔
and X as the numbered keys are pressed,
indicating the selection made.
Key Press
Display 1 2 3 4
Engineer code NVM
Reset only Display open zones
in day mode Alarm on line fail Telephone line
monitoring disabled
X Power down NVM
Reset No display No alarm on line fail Telephone line
monitoring enabled
Press to accept.
11.11.6 System Option 4
Enter followed by - . The RKP display will toggle
✔
and X as the numbered keys are pressed,
indicating the selection made.
Key Press
Display 1 2 3 4
Bell Squawk Bell time seconds No AC fail warning Spare
X No Bell squawk Bell time minuets AC fail warning Spare
Press to accept.
11.11.7 Programmable Re-sets
Enter
HQWHUVHTXHQFH
enter the number of re-sets required - ( = continuous re-setting)