23
Install the control module (BMS) and all battery modules in. Each module uses 4
screws
to fix
it.
3.5.5 Install the MBMS into a 19’ standard rack [If configured]
Install the
buckle nuts
. The position of nuts must meet the position of the MBMS.
Install the MBMS in. Uses 4
screws
to fix it.
3.5.6 Install the Ethernet Switch into a 19’ standard rack [If configured]
Install the
buckle nuts
. The position of nuts must meet the position of the Ethernet Switch.
Install the Ethernet Switch in. Uses
4 screws
to fix it.
3.6 Cables connection
3.6.1 Caution:
Danger:
The battery system is high voltage DC system. Must make sure the grounding
of the rack is stable and reliable.
Danger:
All the plugs and sockets of the power cables must be
orange to orange and
black to black
. Otherwise it will cause personal injury.
Danger:
No short circuit or reserved connection of the battery system’s anode and
cathode.
Caution:
Wrong communication cables connection will cause the battery system failure.
Grounding
