13.2 Precautions on CD
13.2 Precautions on CD
Dirt, dust, scratching and bended disc will result in operation error.
Don't place the disc on the object with edge. Don't scratch the disk.
Don't bend the disc.
The disc should be taken out when it is not in use.
The disc should not be placed at the following places
The places in straight sun shine.
The dirty, dusty and damp places.
The places near the heater of automobiles.
On the seat of automobiles or the plate of instruments.
Don't use these discs, like heart-shape, octagon shape, etc.
Clearing discs
Use the wet soft cloth to scrub the surface of the disc. If the disc is fairly dirty, use
the damp soft cloth with propanol to scrub it gently. Don't use solute like gasoline,
thinner, cleaner often used for disc, as they'll scratch the surface of the disc.
Before calling service, first check the following table for possible problems to
have slightly check or adjust. It might seem to solve the problems and make the unit
come back to order. If you are doubtful of this following table or solve the problems
ineffectively following these help, consult the professional service center.
Warning:
It is very complicated. Do not open the CD changer or
try any repair.
Warning:
It is very complicated. Do not open the CD changer or
try any repair.
Connection wire is loose
The power switch and gniting
Switch are not switched on.
Possible cause
Possible cause
The system is in UTE mode.
Fuse is burnt out
Problem
Problem
No sound
No sound
LCD screen no
any display
LCD screen no
any display
Reconnecting
Set the switches to ON.
Solution
Solution
Leave the MUTE mode.
Replace with new fuse.
XIV
Connection wire of the
speaker is Loose.
Reconnecting
