11.2 Installation guidance
11.2.1 Installation location
11.2 Installation guidance
11.2.1 Installation location
When the temperature in car is too high, do not install this instrument on rear
undercarriage to avoid the problems, in case it is caused by the contact with it. The
following locations also should be avoided,
Direct sunshine
hot air from heater or other high temperature places.
Not safe or heavily vibration.
Too much humid, dirty or dusty.
11.2.2 Installation work
11.2.2 Installation work
According to your selected installation angle, use a screwdriver to adjust the
angle-adjustment screw to a position of
V
or
H
When set to vertical position
Choose
V
position.
When set to horizontal position
Choose
H
position.
This equipment has 5 positions for your choice
A)Horizontal b) Vertical
c) A
22.5 degrees
d) B
45 degrees
e) C
67.5 degrees
The following data is for your reference in installation.
11.2.3 Installation angle
Horizontal installation
The instrument should be placed as follows.
11.2.3 Installation angle
Horizontal installation
The instrument should be placed as follows.
V
V
CC
BB
A
A H
H
V
V
CC
BB
A
A
H
H
Incline angle is less than 10 degrees.
(As shown in top figure.)
Place screws in same positions in both
sides (as shown in left figure).
-18-
<10
degrees
<10
degrees
V
C
B
A
H
Angel Adjust Screw
