PX390 is powered directly from a standard 230 V grid. Failure to observe safety instructions may
result in electric shock and pose a threat to life.
Therefore, it is necessary to observe the following rules:
1. Installation should be performed by a person holding the appropriate qualifications, according
to the instruction manual.
2. Lamp can be connected only to a grid which meets the safety conditions (3-wire grid, equipped
with a circuit breaker).
3. Protect all cables against mechanical and thermal damage.
4. In case of failure of any of the cables, it must be replaced with a cable of the same technical
parameters.
5. All repairs can only be carried out with power disconnected.
6. The device with visible mechanical damage cannot be connected to the mains.
7. Avoid sudden shocks, particularly dropping.
8. The device must not be used in rooms with a temperature below 2 °C or above 40 °C.
9. Clean only with a damp cloth – the lamp must be at this time completely disconnected from the
power supply.
In case of improper usage of the product it may cause a risk of serious injury or death,
because of the threat of fire.
While working outdoors in normal conditions, the housing unit can heat up to +60°C.
Make sure that accidental contact with the device during use is impossible.
4
From a distance of more than 2.0 m from the outer housing of the lamp and LEDs, the light is
harmless to unprotected eyes.