PXM PX390, Manual, Page: 15 / 19

15
Parameter name
PiD Description
TEMPERATURE_LIMIT_
ON/OFF 0x800E temperature limitation activation for the
temperature sensor connected to the driver
,
For 0 value, the function is not active; for 1
value, the function is active. Default value is 1.
TEMPERATURE_
THRESHOLD_LOW 0x800F lower temperature value for which the
temperature limitation is being activated
TEMPERATURE_
THRESHOLD_HIGH 0x8010 upper temperature value for which the
temperature limitation is active, i.e. the cut-off
temperature for exits from the driver
SMOOTH_DIS_0/P2P_
1/TIM_2
*
0x801A selection of the options concerning Smooth
function,
For 0 value, the smooth function is off; for 1
value, the smooth function operates in the
Packet to Packet mode (P2P) and for 2 value,
the smooth function operates in the time
mode. Value 0 set by default – smoothing off.
SMOOTH_TIME * 0x801B smoothing time for TIM (time) function
selected in the above point,
Unit expressed in [ms]. Minimum parameter
value is 10 and maximum is 2000 [ms].
Default value is 200 [ms].
SCENE_COLOR * 0x8021 color temperature settings,
Minimum value: 0, maximum value: 255.
Default value is 128.
SCENE_BRIGHTNESS * 0x8022 brightness settings,
Minimum value: 0, maximum value: 255.
Default value is 128.
FRICKER_FREE_ON/OFF * 0x8023 elimination of the flickering effect,
For 0 value, the function of eliminating the
flickering effect is disabled, and for 1 value, it
is enabled. Default value is 1.
SERIAL_NUMBER 0x8030 device serial number
INVERT_COLOR_ON/OFF * 0x8038 inversion of the light colour characteristics,
For 0 value, this function is disabled, and for 1
value, it is enabled. Default value is 0.
* - parameter editable