The device also has the smoothing option which enables smooth brightness and colour
modifications. When the function is turned on, the transitions between successive DMX values
sent to the lamp (responsible for brightness and colour changes) occur smoothly, without visible
jolts, which prevents light "vibration" effects in the lighting systems.
Smooth
Time *
Smooth
Off *
NEXT
Smooth
P2P *
NEXT
Smooth
Time
ENTER
Model
PX390 +6 MW
7x
NEXT
6.2.5
Smooth time
The next two DMX values sent to the
lamp are linearly smoothed between
DMX signal packets for the selected
option [
P2P
] or the time interval set in
the menu [
Time
].
When the PxArt Settings Controller time smoothing function is active, it allows for changing the
smoothing time value. As a result it enables an acceleration or deceleration of the brightness and
colour parameter change. Maximum available value is 2000 [ms] and minimum is 10 [ms].
[
] -
makes it possible to
change the time parameter at which
subsequent different DMX signal values
sent to the lamp are smoothed among
themselves. The user may set the
smoothing time using "previous" and
"next" buttons.
Smooth time
Smooth time
0200[ms]
Smooth time
0010[ms] *
Smooth time
2000[ms] *
NEXT
ENTER
Model
PX390 +6 MW
8x
NEXT
6.2.4
Smoothing
6.2.6
Restoring default settings
The device comes with the option to restore default settings.
To use this option, select the [
Default sett.
] menu and press "enter".
A window informing about the need to press "previous" and "next" buttons will appear for 2
seconds simultaneously. Next, the device will display [
Reset OK...
] message and default settings
will be restored.
11