PXM PX390 Manual Download Page 3

3

1.  GENERAL DESCRIPTION

2. 

SAFETY CONDITIONS

Caution! Before installing, connecting, using and maintaining the lamp, you 

must absolutely read this document.

The following symbols are used to emphasise important information on security conditions on 
the product and in this manual.

Danger! 

Risk of loss of life and 

health.

Warning! 

Fire hazard.

Warning! 

LED light emission. 

The risk of eye 

damage.

Warning! 

The risk of burns.

Warning! 

Read this instruction 

manual.

Do not look at the LEDs at a shorter distance than 2.0 m from the front surface of the 

tube without proper eye protection. At a shorter distance, LEDs can cause damage or 

eye irritation. Do not look at the light source directly through any optical instruments, 

which focus the light rays.

Caution!

PxArt+ 6 is a professional LED illuminator designed for illumination of museum exhibitions or 
displays.

Thanks  to  the  application  of  the  most  modern  semiconductor  SSL  LED  light  sources  and 
advanced  control  electronics,  a  high  class  illuminator  was  created  which  meets  very  high 
requirements  for  museum  and  exhibition  lighting.  Its  most  important  advantages  include  a 
complete lack of ultraviolet radiation emission, trace amounts of infrared radiation, a very high 
factor of CRI colour capturing, smooth adjustment of colour temperature of emitted light, large 
brightness and small energy consumption.

®

 

The device features a base which allows for mounting it in GLOBAL Trac Pulse control bus bars, 
provided with an additional control line.

Two  individual  addresses  allocated  to  each  lamp  allow  for  independent  adjustment  of  its 
brightness and colour temperature, regardless of the settings of other lamps.
Through push buttons located on the lamp casing it is possible to operate it manually (e.g. in case 
of connecting the lamp to bus bars without a control line).

®

Highly-effective  LEDs  made  by  Osram  Oslon   are  used  in  the  lamp  with  an  efficient  control 
system, through which the lamp emits small amounts of heat.
The lamp casing renders it possible to change the direction of its beaconing in two axes.

Summary of Contents for PX390




















Reviews: