!
PID: 0x801A
,
Editable parameter.
At 0 value Smooth is turned off, for a value of 1
Smooth mode is set to a Packet to Packet (P2P) and for the value of 2 Smooth is in
time mode (TIM-description in 14th point). The default value is 0 - Smooth off;
!
SMOOTH_TIME – Smooth time for TIM function chosen in subsection above -
PID: 0x801B, Editable parameter
. Unit in [ms]. Minimal value of this parameter is
10 and maximal 999 [ms]. Default value is 200.
!
NO_SIG_P1-18|SC_19|ON_20|OFF_21 - choice of work mode for No DMX signal -
PID: 0x801C
,
Editable parameter
. Minimal Value is 1, maximal 21. For values 1-18
menu allows to chose program from 1 to 18 which is played during no DMX signal
detection. For the 19 value a scene saved in memory is set and for the 20 value all
outputs are set to ON with maximum value. The value 21 sets to OFF all outputs
during time with no DMX signal received. Default value is 21;
!
SCENE_RED - settings of red channel value for scene saved in PX282 -
PID: 0x801D, Editable parameter
. Minimal value is 0, maximal 255 (maximal
brightness). By defualt value set to 255;
!
SCENE_GREEN - settings of green channel value for scene saved in PX282 -
PID: 0x801E, Editable parameter
. Similarly as in the subsection above;
!
SCENE_BLUE - settings of blue channel value for scene saved in PX282 -
PID: 0x801F, Editable parameter.
Similarly as in the subsection above;
!
SCREENSAVER_ON/OFF - settings of screensaver (display backlight in PX282) -
PID: 0x8024
,
Editable parameter
. With the 0 value display blanking is not active,
the 1 value means screensaver active. Default value is 0;
SMOOTH_DIS_0/P2P_1/TIM_2 - the choice of options relating to the Smooth function -
15
ź
PID: 0x8025, Editable parameter.
Minimum value is 1 and maximal 999 (maximum
speed). By default it is set to 10. Value 1 represents 0,1s, and 999 - 99,9s;
ź
PROGRAM_FADE - settings of smooth transition between following steps of a program -
PID 0x8026, Editable parameter.
The minimum value is 0 (step transition) a
maximum of 100 (transition completely smooth). The default value is 100;
ź
BALANCE ON / OFF - to activate or deactivate the balance of output channels -
PID 0x8027, Editable parameter.
A value of 0 is a balance off, a value of 1 active
balance. The default value is set to 0;
ź
PWM_FREQENCY - LEDs refresh frequency -
PID 0x8028, Editable parameter.
The minimum value is 366 and the maximum is 25000. The unit is [Hz] and the
default value is 366.
ź
SERIAL_NUMBER - device serial number -
PID: 0x8030
,
Editable parameter
.
The minimum value is 0, and the maximum is 4294836225. The default value is 0.
PROGRAM_SPEED - programs playback speed settings (playing next steps of program) -
ź
DISPLAY_FLIP - inverting the meter display 180 degrees -
PID: 0x8031
,
Editable
parameter
. The minimum value is 0, and the maximum is 1. The default value is 0.
