Pro Video Instruments
VeCOAX MicroMod 3 AV + HDMI RF Modulator Manual
21
VIDEO CUTS OUT COMPLETELY AFTER A FEW HOURS OF USE
-
Some source devices (Set Top Boxes, etc.) have power-saving features that can turn off or de-
sync the HDMI connection after hours of inactivity. Check power settings on the source device
and turn off any power-saving modes. (This will vary from device to device.)
-
Check resolution settings on the source. Recommended setting is 1080p FIXED or 720p FIXED. If
the source is a computer, set Display
to “Extended mode” or “Extend these displays” and set to
1920x1080 or 1280x720.
-
On the unit, go to Advanced Options > Fixed EDID setting, and change from Auto to match the
fixed resolution setting on the source. For instance, if the source is set to 1080p Fixed, change
Fixed EDID to 1080p.
CAN’T LOG INTO THE W
EB INTERFACE
-
Check that the unit is powered on and connected to your computer or network via Ethernet
patch cable.
-
If connecting directly to your computer, check that your computer is set to a static IP address in
the same network segment as the unit. (See page 5 for direction on how to set a static IP
address.
-
Check the On-Board menu (Settings -> Advanced -> IP Settings) to verify you are using the
correct address.
-
Reset the unit to default settings, by pressing the Enter and Escape keys simultaneously, and
pressing Enter when prompted to “Recall Default Settings.”
UNIT DOESN’T WORK WI
TH VIDEO SWITCHERS OR MIXERS
-
Ensure the Video Switcher supports EDID. EDID support is required for our modulators to
understand the signal from HDMI source.
NO AUDIO OR POOR AUDIO (VIDEO IS WORKING)
-
Check HDMI Audio Out settings on the source device. Set to Stereo PCM Linear or Dolby Digital
2 Channel (Uncompressed).
-
Check other audio settings on the source device to confirm audio is not turned off or muted.
-
Check HDMI cable connection between source and unit. Disconnect HDMI source and
reconnect it to establish a new HDMI handshake. Test with a different cable if possible.
-
Test with a different source (e.g. DVD player) if possible.
