Installation Guide / SolarBase Low Ballast Flat Roof System
8
Installation Guide V 1.4 - NO.:PZ30-IM01-14
- Installation Instructions -
Install PV modules and Module Clamp 40
Rotate the right part of Support Leg to the required position as
shown in Figure 10.
Place PV module smoothly on Support Leg. According to
installation planning, adjust left and right positions of PV
module and guarantee frame of PV module attach to the
rotating part of Support Leg. Pay attention to installation
direction of PV module as shown in Figure 11.
Fasten the frame of PV module and Support Leg with Module
Clamp 40 as shown in Figure 12.
Adjust Module Clamp 40 to ensure that it’s located in the
middle of preassembled parts of Support Leg and fasten
tightly. While fasten the Bolts M8*25, hold the Module Clamp
40 to ensure it unmovable, as shown in Figure 13 and 14.
Recommended torque:
18-20N.m for Bolts M8*25
After fasten the Module Clamp 40, lay PV Module slightly
down on the preassembled part of Support Leg in the rear row
as shown in Figure15.
Figure 15
Figure 14
Figure 12
Figure 13
Figure 11
Figure 10
