Installation Guide / SolarBase Low Ballast Flat Roof System
6
Installation Guide V 1.4 - NO.:PZ30-IM01-14
Installation Instructions
Install Support Leg team
According to specification of ballast, adjust distance
between two square neck bolts on Support Leg and fix
square neck bolts, as shown in Figure 1.
- Installation Instructions -
According to specification of ballast,
adjust distance between both square
neck bolts.
Figure 1
Figure 2
Put rubber protection gasket into Support Leg and make
sure the hole centre of rubber gasket is aligned with bolt
centre, as shown in Figure 2.
Figure 3
According to installation specification, use tools such as
tape, string and marker pen to make out position and then
place Support Leg, as shown in Figure 3.
