Nixie Tube Clock ‘Nixie QTC+’
2 (01 October 2018)
www.pvelectronics.co.uk
- 26 -
5.4 GNP-17A Nixie Tubes.
Code configuration: A (see page 36)
Cell PCB Type:
These tubes have 2 leads that need to be removed as shown
below. Use the gap to correctly orient the tube:
To facilitate easy insertion of the flying leads into the small holes, it
helps enormously to trim the flying leads with a pair of scissors.
Start at one of the leads at the back of the tube. Then, working
around the tube, cut each sucessive lead approx 2mm shorter than
the previous one. This will allow you to feed each lead in in turn.
Now you can insert and solder in the tube. Insert the 11 leads into
the 11 holes with pads as shown below. Insert from the side of the
PCB with no markings.
Summary of Contents for Nixie QTC Plus
Page 57: ...Nixie Tube Clock Nixie QTC 2 01 October 2018 www pvelectronics co uk 57 ...
Page 59: ...Nixie Tube Clock Nixie QTC 2 01 October 2018 www pvelectronics co uk 59 13 CIRCUIT DIAGRAM ...
Page 60: ...Nixie Tube Clock Nixie QTC 2 01 October 2018 www pvelectronics co uk 60 ...
Page 61: ...Nixie Tube Clock Nixie QTC 2 01 October 2018 www pvelectronics co uk 61 ...
