Nixie Tube Clock ‘Nixie QTC+’
2 (01 October 2018)
www.pvelectronics.co.uk
- 14 -
Take care that the notched end of the IC socket is at the end
shown. However, if you find you soldered it with the wrong
orientation, do not try to remove it. It is perfectly fine with the
notch at the wrong end, just be sure to place the IC in the socket
with the IC’s notch in the correct position.
Also the MOSFET needs to be placed with the two joined pins at the
position shown below.
Ensure that the (-) light stripes on C3 and C4 are facing towards
each other as shown below.
Summary of Contents for Nixie QTC Plus
Page 57: ...Nixie Tube Clock Nixie QTC 2 01 October 2018 www pvelectronics co uk 57 ...
Page 59: ...Nixie Tube Clock Nixie QTC 2 01 October 2018 www pvelectronics co uk 59 13 CIRCUIT DIAGRAM ...
Page 60: ...Nixie Tube Clock Nixie QTC 2 01 October 2018 www pvelectronics co uk 60 ...
Page 61: ...Nixie Tube Clock Nixie QTC 2 01 October 2018 www pvelectronics co uk 61 ...
