Putzmeister 210109379, Operating Instructions Manual

Page: 36 / 434

Safetyregulations
210
BP03_076_1601EN
The inspection intervals are fixed as follows:
Machines of up to and including 5years old:
Inspect after every 1,000operating hours or 1year, whichever is
soonest. The interval is repeated after every retest.
Machines more than 5years old:
Inspect after every 500operating hours or 1year, whichever is
soonest. The interval is repeated after every retest.
Machines more than 10years old:
Inspect after every 250operating hours or 1year, whichever is
soonest. The interval is repeated after every retest.
The day of initial commissioning in accordance with the handover
report and the machine’s operating hours meter are definitive for the
intervals. This operating hours meter records the hours of pumping
operations. The operating hours meter must always be kept in good
working order. It must not be tampered with. For machines without an
operating hours meter, the operating hours must be comprehensibly
recorded in writing.
Retesting must be arranged by the operator. The results of retesting
must be entered in the check book and signed. The check book
must always be kept with the machine and must be produced upon
the request of the national supervisory bodies.
Notwithstanding national legislation, the operator can be liable in the
event of damage, if it is proved that the damage has arisen as a
consequence of regular retesting not being properly carried out.
If retesting is not carried out, the manufacturer will assume that the
machine has been shut down. When the machine is restarted, retest
ing must be carried out.
2.2.2 Inspection intervals
for retesting