Putzmeister 210109379, Operating Instructions Manual

Page: 284 / 434

Maintenance
714
BP09_004_0502EN
Level of contaminant 19/16/12 in accordance with ISO4406 is speci
fied for lubrication and the hydraulic system. You can find the level of
contaminant of the initial filling from the test report on the machine
card.
We can carry out a lubricant analysis for you should you discover
that the functioning of your machine is impaired with one of the lu
bricants or hydraulic fluids used. Please consult Putzmeister, Depart
ment APS (After Sales) and request our analysis kit (material
no.257260.004). We will carry out a lubricant analysis to determine
the cause.
Do not store oils and greases in the open air. Water may be ab
sorbed through the bung hole in the event of changes in the expo
sure to the weather.
Only ever store the barrels lying on their side and supported on
timber blocks, with the bung hole facing upwards.
Environmental protection
You must carefully collect all functional fluids, e.g.used oil (including
biologically degradable oils), filters and auxiliary materials and dis
pose of them separately from other waste. You must keep used oils
of various types separate in order to keep disposal costs as low as
possible.
Observe the national and regional regulations applicable to your
area. Only work with waste disposal companies who are approved
by the responsible authorities.
7.5.2 Level of contaminant
7.5.3 Lubricant analysis
7.5.4 Storage of lubricants