DO NOT USE LUBRICATED AIR.
This device requires a dry, non-
lubricated 90 psi (6.2 bar) maximum
air supply filtered to 5 µm and a 0.3
micron oil mist separator.
Non-compliance with these
requirements will void the
manufacturer’s warranty.
(See Section 4.4)
All fasteners, mounting holes and
pipe threads on this tool are
METRIC.
HANDLE WITH CARE
DO NOT DROP
All
PushCorp, Inc.
electrical cables are rated for
high twist and flex robotic applications with a
minimum cable bending radius specification of
125mm (5 in). Cable damage resulting from
failure to abide by this specification will not be
covered under warranty.