Purite SELECT FUSION 160, Operator'S Manual, Page: 44 / 89

OPERATING MANUAL FOR SELECT FUSION
5.4.1
On selecting “
Dispense Options
” you will be presented with the
following choices: -
Dispense Method
Dispense Volume
Dispense Print
•
On selecting “
Dispense method”
you will be presented with 3
choices of dispense: -
Manual Hold
Manual Latched
Volume
•
If “
Manual Hold
” is selected on pressing the Dispense button
water will be dispensed, on releasing the dispense button water
flow will stop.
•
If “
Manual Latched
” is selected on pressing the dispense button
water will be dispensed, on releasing the button water will
continue to flow. To stop dispense the button has to be pressed
for a second time.
•
If “
Volume
” is selected you will then need to set the volume to be
dispensed by pressing EXIT and then selecting “
Dispense
Volume”.
By using the ▲▼ arrow buttons program in the volume
required.
From 0 – 1.00 litres the volume increases by 10mls
From 1.1 litres to 10.00 litres the volume increases by 100 mls
From 10.01 litres the volume increase by 1.0 litres up to a
maximum dispense volume of 20 litres.
5.4.2
On selecting
“Dispense Print
” you can select this function to be
Enabled or Disabled. If Enabled every time water is dispensed from the
unit and if the unit is connected to a printer, a “Validation Report” will be
printed out. (See Contents of a typical Validation Report print out
below):
VALIDATION REPORT
Time
:11:42:30
Date :21/01/05
Unit ID Number :1
Unit Serial Number :26745
Outlet Quality :18.2M
Uncompensated Quality :29.8M
TOC
:5 ppb
Temperature :21.0 degC
NCP pack Replacement Due
PP8 pack Replacement Due
Iss: F 17.03.08