Puricom CT8, User Manual

Page: 6 / 24

3
SAFETY INFORMATION:
Please read this information to prevent property loss and to ensure your
safety.
INSTALLATION SAFETY
1. Keep the product away from inflammable gas or burnable materials.
2. Do not install the unit near heaters.
3. Do not spray with water. Use a damp cloth to clean.
4. The length of the water inlet hose must be shorter than 5m.
If longer;product performance may be degraded.
5. Do not use with hot water. Optimal inlet water temperature is 5
℃
- 45
℃
.
6. Inlet water pressure is 15 - 45 PSI.
7. Water analysis TDS should not exceed 1000 PPM . Hardness should not
exceed 250 PPM.
8. Ensure the inlet, outlet and drain connections are correct and that the drain
point is not blocked.
9. The filtration system installation shall comply with state and local laws
and regulations. Do not use with water that is microbiologically unsafe, of
unknown quality, or without adequate disinfection before or after the system.