Puricom CT8, User Manual

Page: 16 / 24

13
1. Make sure all connections and filters are
properly installed.
2. Allow a tank of water to rinse through system
before first time use.
E. Notice Before Using
1
4
2 3
D. Faucet Assembly
2 centimeters from the end of the tube. Place the spacer into the end
of the tube.
4. Put the end of the tube into the bottom of the faucet and tighten the nut
to complete the faucet assembly. Refer to p.10 .
1. Drill a 12mm hole on the right or left hand side of
the sink.
2. Install the new faucet in the sink hole, and
from below the sink, assemble the mounting
hardware.
3. Slide the nut from the bottom of the faucet onto
the end of the tube. Then place the seal on the
end of the tube and slide down to about