background image

1.  PRESENTATION

The water treatment equipment that you have bought is a sof-
tener of last generation with one of the most advanced control 
heads in the market.
The quality of the water in our environment is its getting wor-
se day by day and this is causing an increase of the water 
hardness , this fact can  cause  incustration problems in the 
connections and can affect the right performance of the equi-
pments . The use of this water increases the maintenance 
cost and reduces their life time.    
This reality has driven us to design this range of household 
softeners specially thought to ensure the supply of a high sof-
tened water in your home.
Your softener DENVER  range will provide you and your family
the following advantages.

BENEFITS AND ADVANTAGES:

Reduce the hardness present in the water, causing the 
incrustations.
ENERGETIC SAVING: Avoid the future incrustations in 
the pipes and connections.
Great wellness sensation in the shower.
Soft and smooth skin.
Increases the life time of the electronic devices and 
heating systems.
ECONOMIC SAVING: Reduces the consumption of the 
soaps, softeners and chemical products.
Low cost of maintenance.
Automatic function, your only concern is to add salt to 
the tank storage from time to time.

It is important that you keep and read this manual carefully befo-
re the installation and starting up of this equipment. If you have 

any doubt about the installation, use or maintenance of this equipment, 
please contact with the technical assistance service (T.A.S.) of your dis-
tributor.

1.1 Softener safety

Your safety and other’s safety are very important. We have in-
cluded safety messages in this manual and on your appliance.
This is the safety alert symbol.

This symbol alerts you to the potential hazards that can 
be risky for you and for others.

1. Presentation

2

All safety messages will follow the safety alert symbol or either  
the word  “DANGER” or “WARNING”.

APLICATION  IN THIS MANUAL

“DANGER”

You can be killed or seriously injured if you do not immedia-

tely follow instructions.

 

“WARNING”

All safety messages will inform you about the potential ha-

zard, how to reduce the chance of injury and what can happen if the 
instructions are not followed.

1.2 Before starting

Please see the section  “Warnings” before installing the softe-
ner. Follow the installation instructions very carefully (Failure to 
install the water softener properly voids the guarantee).
Before starting the installation, read this entire manual. Af-
terwards, obtain all the necessary materials and tools for the 
installation.
Check  the local plumbing installation and the electrical legis-
lation.
Use only lead-free solders and pipes for all connections as per 
legal requirements.
Be careful when handling the softener. Do not turn it upside 
down, drop it, or or set it on sharp/cutting objects.
Do not installe it outdoors, keep it away from direct sunlight 
and from other adverse weather conditions. 

Summary of Contents for DENVER

























Reviews: