14
3.
Shake it.
4.
If the water becomes blue it means that it is completely
softened, if it has a reddish means that presents some kind
of hardness.
5.
Add some drops of B reactive till the water gets blue.The
quantity of drops used will be the quantity of hardness in ºHF
found in the tested water.
DROPSTO GET BLUE WATER
7.2 Regulation of residual hardness
As stated out in section 2.7. it is recommended not to supply
completely softened water to household installations.
Denver systems have a residual hardness regulator that allows
to adjust the hardness quantity in the treated water.
This works making a small test of non treated water with a
completely softened water.
In order to regulate the residual hardness you should carefully
open the regulator.
Now you can test the hardness of the outlet water and check
that it is according to the desired values. If it is not like this
adjust the regulator and check it again.
ATENTION:
The hardness regulator is supplied comple-
tely closed, so if you do not regulate it the softener will
provide a totally softened water.
7.3 Hardness checking
In order to check the hardness of the water with the tester
(code 271800), you should follow following steps:
1.
Prepare the water to be analyzed
2.
Add two drops of indicator reactive A
15
2 DROPS A
7.
Start-up
