7
HYBRID-R TRIPLE SERIES
| Triple Filtration & Ultraviolet Disinfection All in One Unit
Application warning: minimum water characteristics must be met before
installation of Radfire™ to ensure proper operation and continuous protection.
•
If stated water quality parameters are exceeded; pre-filtration is required as water
of this quality can compromise the effectiveness of the UV system. The filters
and the sleeve should be cleaned or replaced as required to keep them in good
condition.
• If bacteria has been present prior to the installation of this system, we recommend
flushing the pipelines with Puretec TankSafe.
• Never connect PVC pipe directly to the unit.
The outlet pipework within 1 metre
should be metal or polyethylene.
• The system should not be used for any other purpose without specific referral to
Puretec.
• Heating of water is an integral feature associated with UV systems and if this
is deemed a problem we recommend installing a temperature management
valve, which is installed inline immediately after the system and releases water
periodically. Ordering code is
RI-TMS4.
Note: This water filtering appliance should only be installed by a fully qualified &
licenced plumber.
Installation Requirements
Summary of Contents for HYBRID R10
Page 20: ......